Article No. VK-10152
Ultrasonic Probe 2 MHz
Single-element transducer with a frequency of 2 MHz suitable for investigations with medium penetration depths, waterproof
With a frequency of 2 MHz, these red-marked probes are suitable for a wide range of applications. Due to the higher frequency, the axial and lateral resolution power is clearly higher than with the 1 MHz probes. On the other hand, the attenuation for 2 MHz in most materials is still not too large, so investigation areas at medium depth can still be reached without any problem. In particular, these probes are also suitable for studies on medical objects and as ultrasonic Doppler probes.
They have a robust metal housing and are waterproof. They are supplied with a special plug for connection to the GS200 / GS200i.
To connect the probe to a GAMPT-Scan or FlowDop use the adapter VK-10402.
To connect the probe to an oszilloscope with BNC connector use the adapter VK-20285.
Frequency: 2 MHz
Dimensions: length = 70 mm, diameter = 27 mm
Cable length: approx. 1 m
Sound adaptation to water/acrylic
Special plug with probe identification for connection to GS200 / GS200i
| PHY02 | Sound velocity in solids |
| PHY03 | Acoustic attenuation in solids |
| PHY04 | Acoustic attenuation in liquids |
| PHY05 | Spectral investigations |
| PHY08 | Ultrasonic B-Scan |
| PHY09 | Ultrasonic computer tomography (CT) |
| PHY10 | Characteristics of sound field |
| PHY13 | Ultrasonic Doppler effect |
| PHY15 | Fluid mechanics |
| PHY16 | Mechanical scan methods |
| PHY20 | Determination of focus zone |
| PHY21 | Reflexion and transmission at boundaries |
| PHY23 | Dispersion of ultrasonic waves (Lamb waves) |
| IND01 | Non-Destructive Testing (NDT) |
| IND03 | Level measurement |
| IND06 | Angle beam testing |
| IND07 | Crack depth determination (TOFD) |
| IND08 | Detection of discontinuities |
| MED04 | Biometry at the eye phantom |
